PRODUCTS

NSH MASTER MCH-4 Gear Pump (НШ32,50МЧ-4)

NSH MASTER MCH-4

ETERNAL HYDRAULIC

NSH32 MCH-4, NSH50 MCH-4

Eternal Hydraulic НШ32,50МЧ-4

( MTZ / belarus-tractor Supplier )

The main difference оf «MASTER МЧ» pumps is a body of high-strength cast iron, which made it possible to install pumps in hydraulic systems with a working pressure of 200 bar and ensured the service life of the 7000 machine hours.

Gear pumps series MASTER have been manufactured since 1996. Pumps have won the commitment of consumers with high technical parameters.

The nominal working pressure is 200 bar, which allows using them in modern hydraulic systems of the fourth pressure version.

Bearings are installed in the casing and pump cover, thanks to which it became possible refuse the sleeve construction and reduce the quantity
of parts. This greatly increased the reliability of the pump.

These pumps can be used on most agricultural tractors and units, as well as on many construction, road, forest, communal and other machines. It is especially important to use these pumps on machines with cramped dimensions in the installation area.

Сompletely interchangeable with pumps of the M-4 and D-4 series of the relevant working displacements.

Displacement (cm3/rev): 32,50
Maximum continuous pressure (bar): 200
Maximum intermittent pressure (bar): 250
Maximum peak pressure (bar): 280
Maximum speed (min-1): 3000
Minimum speed(min-1): 500

NSH M Gear Pump

NSH6м-3, NSH10м-3, NSH14м-3, NSH16м-3, NSH25м-3, NSH32м-3, NSH40м-3, NSH50м-3

NSH32MCH-4, NSH50MCH-4

 

Features of  NSH MASTER MCH-4 Gear Pump

  • Pump bodies are made of high strength cast iron, what allow towithstand large hydraulic loads and ensure high reliability anddurability.
    Slide bearing provide elevated pump resource.
  • Resource 7000 machine hours
  • Maximum pressure is up to 250 barO High reliability and durability
  • Low noise level
  • High efficiency during the whole service life

 

Related Product

MP80 Series Directional Control Valve

Russian MPC70.4 Hydraulic Distributor

 

Application of NSH Gear Pump

Designed for pumping working fluid (mineral oil) in hydraulic systems of tractors, combines, cars,loaders, graders, pavers, as well as in any other agricultural(Crawler agricultural tractors, Forestry tractors), road building(Powerful crawler dozers, pipelayers, wheel loaders, wheel dozers, Crawler loaders and backhoe loaders), logging and any other machinery where hydraulics are used.

 

Leave a Message